How to Setup Silent Disco Equipment

1. Take the transmitter and power cord out of the black case

2. Plug in the power cord into outlet and transmitter on the left side

3. Turn on the transmitter by moving the switch on the right side to high

4. On the antenna side of the transmitter, click the round button to change the channels. 

5. Make sure each transmitter is set to a different channel (1, 2, 3).

1. Plug in the gold cables provided into the red and white ports on the transmitter.

2. Connect the other end of the cables to your audio source (audio source not included).

3. Silence at the Disco provides adapters for both iphone and android devices or you can use a standard audio port (3.5mm).

4. Press play on the audio source and the transmitters will send music to the headsets.

5. We recommend turning the volume all the way up on the audio source, then each individual can adjust the volume on their headset to their preferred volume level.

1. On the bottom of the left earphone, turn the switch to on. Headset should light up

2. On the right side of the left earphone, there is a switch with three settings. These correspond to the channels set on the transmitters (step 5 of "Plug in Transmitter").

- blue = channel 1

- red = channel 2

- green = channel 3

** Part of the Silent Disco ~magic~ is switching between channels to find your groove!

3. On the right earphone, there is a dial that controls volume. If no music is coming out, make sure the volume is not set to 0.

Having trouble getting into the groove? Don't worry, we've got your back! First, check out our handy video tutorial for step-by-step guidance. If that doesn't quite hit the right note, don't fret. Below, we've listed a few common hiccups and their solutions. And if you're still stuck, don't hesitate to give us a ring at 307-399-2510. We're here to help you find your rhythm again!

​​

NO MUSIC PLAYING IN HEADPHONES:

• Confirm the transmitter is on and a channel number is displayed on LED screen

  • If it won't turn on, make sure the plug is all the way in the outlet. 9/10 times, the issue is something isn't plugged in!​

• Check each transmitter is on a different channel, the numbers shouldn't match on any of the LED screens

• Disconnect the audio source from the transmitter and confirm the audio source plays music while not connected. If it does, the audio source settings may need to be adjusted to send music to the transmitter once it's reconnected.

• Confirm the headphones are on and displaying the color for the channel that is not playing.

  • Double check the volume dial on the right earphone is not turned all the way down, we've made that mistake too many times to count!​

​​

HEADPHONES DON'T LIGHT UP OR CHANGE COLOR

• Confirm the headphones are switched on, sometimes the channel switch is confused for the on/off switch.

• Sadly, the headphones may be having a technical issue, but don't worry! We threw in a couple extras headsets to account for any technical mishaps.

​

If you're at this point and still having issues, give us a call!​